Replacing the Motor

How to remove and replace your trimmer motor

Step 1: Follow the appropriate steps to remove the belt.

Step 2: Using the 5/32″ Allen Wrench, remove the four bolts holding the electrical switch to the body.

Step 3: Using the 5/32″ Allen Wrench, loosen the set screws on the motor pulley and remove the pulley.

Step 4: Place some padding under the motor before removing.

Step 5: Using the 3/8″ Allen Wrench, remove the four bolts holding the motor to the body.

Step 6: Remove the motor and put a new motor in its place