Skirt Assembly

How to remove and re-attach the trimmer skirt

Step 1: Remove the skirt from the CenturionPro trimmer

Step 2: Attach the dust hoses to one end of the skirt using the 4” hose clamps to hold it down.

Step 3: Attach the diverter to the other end of the dust hoses using the two remaining 4″ hose clamps

Step 4: Using a soft rubber mallet, attach the skirt assembly to the blower unit.

Step 5: Take note of the position and relationship of the holes on the diverter to the bracket on the skirt; ensure that the holes on the diverter are facing UP when installing.

Step 6: Attach the skirt end of the assembly to the machine, ensuring that it properly hooks into place.